Southern California Club Xterra
Southern California Club Xterra => Off Topic => Topic started by: RikRong on January 22, 2016, 07:58:11 AM
-
So, my AFE exhaust has been sitting in my garage since I took it off my Frontier in April. The front half of the exhaust is a perfect fit for the Xterra, however the over-axle part needs to be trimmed a little and possibly cut and re-welded, and possibly have some hangars moved. It shouldn't be much work for anyone that has the know-how and tools, but I have neither. I'd rather have someone on here assist, instead of taking it to a shop, and offer my assistance, some frosty beverages, and burgers, if they are willing to help
-
I think a certain horned member would fit the bill perfectly...but I cannot speak to his availability, so I would add some Dos Equis and Chipotle to the offer...(hint hint)
-
I could easily throw in some Dos Equis and Chipotle. ;)
-
Depends on if your closer to him or fallbrook I can help out
Sent from my SM-N915V using Tapatalk
-
I appreciate the offer, I'll keep you in mind. Definitely closer to the man with the horns.
Sent from my XT1575 using Tapatalk
-
I'm sure we could get some time at The Shop if Danny can't do it right now.
-
I'm sure we could get some time at The Shop if Danny can't do it right now.
It doesn't really need to be immediately, I was just thinking within the next few weekends. If you have time that you are free, I'm plenty willing to work around your schedule.
Sent from my XT1575 using Tapatalk
-
I can help but I'm not sure I'll be any good with an exhaust. Re-routing requires making bends and I don't own any gear to perform exhaust bends or expanders to index the tubing.
-
I can help but I'm not sure I'll be any good with an exhaust. Re-routing requires making bends and I don't own any gear to perform exhaust bends or expanders to index the tubing.
Yeah, that makes sense. When I put the exhaust under the truck, everything looked good, except for the straight part coming out the exit side of the muffler, this was too long. I think all that would need to be done is cutting and possibly moving the hangars. Maybe I need to get back under the truck again and make sure, before deciding on where to do the install.
Sent from my XT1575 using Tapatalk