Southern California Club Xterra

Southern California Club Xterra => SCCX General Discussion => Topic started by: ultrapc40 on October 18, 2013, 10:25:36 AM

Title: CreativeFabWorks prototyping
Post by: ultrapc40 on October 18, 2013, 10:25:36 AM

Hi Xers,

Danny was kind enough to let us play with his Ride so we can fab up some new product for the Xterra.

Starting small with a back up light bracket for the roof. Great for getting that extra light for night runs, dust light for the high speed desert or when you are setting up camp
(http://img.tapatalk.com/d/13/10/19/dymyqe5u.jpg)
Next up is a stealth mount LED brackets for the stock front bumper. You can fit a 20 inch LED light bar in with these brackets. You can utilize the side mounts on the China or Rigid bar or using addition brackets you can install the super bright Ironman4x4 LED bar with their foot mounts.
(http://img.tapatalk.com/d/13/10/19/mesa9e8u.jpg)
(http://img.tapatalk.com/d/13/10/19/epabe8eq.jpg)
Want some protection from those pesky shopping kart or Honda civics?
Check out the bull bar. Unlike the westin bull bar, this mounts to your frame and the stock metal bumper, it doesn't take away your approach angle and it looks clean. Similar to the light bar bracket, a 20 inch light bar will bolt into this bull bar.(http://img.tapatalk.com/d/13/10/19/eru6ubub.jpg)

We are busy working on a few more items for you guys, look for these items at xterraperformance.com soon.
 
Out shop is located in Fullerton near the Home Depot.

If you have any question or want custom items made, you can reach me via Private message.

Thanks
Spencer

Title: Re: CreativeFabWorks prototyping
Post by: DannyX on October 18, 2013, 10:33:06 AM

Thanks spencer!

Title: Re: CreativeFabWorks prototyping
Post by: xxSVxx on October 18, 2013, 11:08:43 AM

Freaking awesome....I will definitely hit you up with some ideas :)

Title: Re: CreativeFabWorks prototyping
Post by: CAWoody on October 20, 2013, 03:30:53 PM

If ever need anything CADD drafted let me know.

Title: Re: CreativeFabWorks prototyping
Post by: ultrapc40 on October 21, 2013, 08:29:44 PM

(http://img.tapatalk.com/d/13/10/22/ysysy8e5.jpg)
Xterra getting more love today with tig welded bumper frame horns. Finish product will be bolt on.

Here is a poll out for you guys. Do you guys care for the front swaybar?

Title: Re:
Post by: knightrider on October 21, 2013, 09:08:15 PM

Radflos with 600 lb springs, Freeway yes, offroad no.  After timbren bumpstops, not so bad even on the freeway.  I'll let you know after I get home from texhas vacation and titan swap :-)

Title: Re: CreativeFabWorks prototyping
Post by: ShockBlue_Scott on October 21, 2013, 09:29:16 PM

Great looking work. Do you do anything for a 1st Gen?

Title: Re: Re: Re:
Post by: Toro on October 22, 2013, 07:42:50 AM

I put 650lbs springs on my rig and it handles alot better. I dont care for sway bars.

Quote from: knightrider on October 21, 2013, 09:08:15 PM

Radflos with 600 lb springs, Freeway yes, offroad no.  After timbren bumpstops, not so bad even on the freeway.  I'll let you know after I get home from texhas vacation and titan swap :-)

Title: Re: CreativeFabWorks prototyping
Post by: ultrapc40 on October 23, 2013, 05:38:48 PM

(http://img.tapatalk.com/d/13/10/24/yga8ama8.jpg)
(http://img.tapatalk.com/d/13/10/24/e5e5ena6.jpg)
I will let Danny show you what we did with the skid plate.

100% bolt on.

Title: Re: CreativeFabWorks prototyping
Post by: 08PrerunnerX on November 05, 2013, 12:03:04 PM

Those are awesome light mounts. I may be in the market for some of those and maybe that bull bar here in a few months or so.

Title: Re:
Post by: DannyX on November 05, 2013, 01:37:05 PM

Thanks. I can also sell you the prototype if you are interested.... Pm me when ur ready