Southern California Club Xterra
Southern California Club Xterra => SCCX General Discussion => Topic started by: pmkroger5 on September 17, 2021, 02:48:36 PM
-
My 2001 Xterra (313K) failed smog in CA for the first time because O2 sensor was "not ready". I believe this is related to a combination of a new battery installation and very little driving afterwards over the last 12 months (< 1800 mi). The test station suggested that I drive as much as possible before they retest, and I've been driving at least 1 hour every day both fwy and in town. I have an OBDII scanner, but when I scan the emission test readiness codes they all come up as "N/A" (not applicable). I don't know if this is a problem with the scanner or if these codes simply aren't available on 2001 Xterra's. Has anyone here been able to see the emission readiness codes on a 2001 Xterra with any kind of scanner? Thanks.
-
You'll need to upgrade your scanner to one that will show graphs & chats.
-
Thanks for the advice. I bought another cheap ($10) scanner from Walmart and it was able to retrieve the readiness codes. I ended up taking my Xterra to the local Nissan dealer and they discovered a problem with my wiring harness. After a partial replacement of the harness (~$700) my O2 sensor readiness code was OK and I completed my SMOG test.