Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: Moving and have a bunch of parts to sell that might be useful.  (Read 2759 times)

dan826

  • Jr. Member
  • **
  • Posts: 73
  • 4wd Pts: 4
Moving and have a bunch of parts to sell that might be useful.
« on: September 02, 2018, 11:36:15 AM »
Ok, so will be moving soon and clearing out the garage. I have a bunch of parts off an X and a Frontier that might be of interest to people here:

2 R180 diffs, barely used. These were replaced with m205s  a few years ago with less than 3k miles on them for a titan swap.
2 Stock Bilstein rear shocks off a pro4x X
2 Stock Bilstein rear shocks off a pro4x Frontier
2 Stock Belstein front shocks off a pro4x X
2 Stock Belstein front shocks off a pro4x Frontier
2 Radflow 2.0 Front shocks from a Frontier.
2 PRG UCAs off a Frontier.

The Radflo/UCA kit might be missing a few of the little washer/spacers where the bolts go through, but I'm sure those are easy
to get replacements for.

All these have very little wear/use.

Make me any reasonable offer for anything you want. Pickup only. I'm in Riverside.






KickinTires

  • Jr. Member
  • **
  • Posts: 70
  • 4wd Pts: 9
Re: Moving and have a bunch of parts to sell that might be useful.
« Reply #1 on: September 07, 2018, 09:41:52 PM »
Tell me more about the Radflo 2.0 inch shocks.  What are the coils rate for, 600lb?  How many miles on them roughly.  Mine need to be rebuilt and this may be easier in the long run.
« Last Edit: September 12, 2018, 07:49:11 AM by KickinTires »
Mark

Club Frontier Member "KickinTires"

dan826

  • Jr. Member
  • **
  • Posts: 73
  • 4wd Pts: 4
Re: Moving and have a bunch of parts to sell that might be useful.
« Reply #2 on: September 16, 2018, 09:08:13 AM »
Spring rate 650. I had them on for a few months and then replaced them when I decided to go for a titan swap. I'm guessing they have Max 2000 miles.

KickinTires

  • Jr. Member
  • **
  • Posts: 70
  • 4wd Pts: 9
Re: Moving and have a bunch of parts to sell that might be useful.
« Reply #3 on: September 17, 2018, 09:42:03 PM »
Thanks Dan for the feedback.  Mine are the same as yours except with about 100K miles.  They're toast, but can be rebuilt. So I decided to pull my Radflos off the truck and will send them in for a rebuild.  Running the OEM Pro-4X Bilsteins and I'm hoping the Radflos get done fast as the OEM jobs are crap.  Good luck with all the other items.
« Last Edit: September 18, 2018, 07:47:43 PM by KickinTires »
Mark

Club Frontier Member "KickinTires"

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: Moving and have a bunch of parts to sell that might be useful.
« Reply #4 on: September 20, 2018, 10:52:15 PM »
Interested in the PRG UCA's.  Info?
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

dan826

  • Jr. Member
  • **
  • Posts: 73
  • 4wd Pts: 4
Re: Moving and have a bunch of parts to sell that might be useful.
« Reply #5 on: October 07, 2018, 09:25:18 AM »
They are these: http://www.prgproducts.com/shop/product/spc-upper-arms/ Great shape, very little used. Switched them out for the titans after the titan swap after a couple months of use.

 


Powered by EzPortal