Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: Skid plate question  (Read 5495 times)

Drew117

  • Jr. Member
  • **
  • Posts: 20
  • 4wd Pts: 1
Skid plate question
« on: March 29, 2014, 09:33:39 PM »
Hey guys new member here and I just got a 2013 X and I love it but I took it to holy jim trail and hit a rock on my front skid plate. It's still on but it's bent and hanging lower. Does anyone know how much it would cost to replace with a stock front skid plate

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re:
« Reply #1 on: March 29, 2014, 10:12:47 PM »
Welcome from Pasadena.
   Don't bother replacing the skid with another stock skid. You'll only be replacing it again in no time flat.
Check out
http://www.heftyfabworks.com/shopping-cart.html#!/~/product/category=523179&id=2069010
Or
http://www.shrockworks.com/Gen2-Front-Radiator-Skid-Plate-Xterra-&-Frontier-pr-16178.html

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: Skid plate question
« Reply #2 on: March 29, 2014, 11:33:06 PM »
You really WANT the skid plate to get banged up.  That's is its job.  To prevent importanstuff likd the motor or transmissIon from getting banged upYou could get a stronger and beefier skid plate.
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

HEVAK

  • Hero Member
  • *****
  • Location: Aliso Viejo
  • Posts: 811
  • 4wd Pts: 32
Re: Skid plate question
« Reply #3 on: March 30, 2014, 07:08:37 PM »
Stock skids are one time use items..

Gotta get yer self some steel  ;D
I love it when a plan comes together

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re: Re: Skid plate question
« Reply #4 on: March 31, 2014, 08:29:53 PM »
When they are new, they look like this.


When it's done right, they'll look like this.


SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: Skid plate question
« Reply #5 on: April 01, 2014, 08:25:06 AM »
What's even funnier is when you remember the rocks!!!
Terry

Greasy side down - K6XTL

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Skid plate question
« Reply #6 on: April 03, 2014, 11:45:39 AM »
All of the above is great advice...IF you are on a budget, you can also scan thenewx.org For Sale forum for used Off Road/Pro-4X stock skid plates.

However, if you plan to do any serious off roading (and if you bent a stock skid plate already...you're there), this is something to upgrade ASAP.

Gents, correct me if I'm wrong here, but order of upgrade/install would be:

-engine
-transmission
-transfer case (besides your rear diff, the lowest contact point for rocks)
-radiator
-gas tank
-rear diff

A lot of people will install the gas tank skid last - but consider this - the stock replacement cost, just for the part, for an Xterra plastic gas tank is in the neighborhood of $1,200...while the skid plate will set you back about $200.

A full set of skids from the two manufacturers listed by Toro should set you back (with hardware, meaning nuts and bolts to mount all) between $750 and $1,000...still less than the replacement of your gas tank...the last thing you should protect.

Just a few more thoughts to clog your mod friendly brain... ;D
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: Skid plate question
« Reply #7 on: April 03, 2014, 12:23:00 PM »
I don't agree.  Most of the polls i've seen regarding the order of upgrades has been like this:
-tires
-suspension
-communications
everything else based on budget...motor last.
Ultimately it comes down to personal preference and wallet.
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2519
  • 4wd Pts: 227
    • 2016 Pro4x
Re: Skid plate question
« Reply #8 on: April 03, 2014, 01:16:09 PM »
i think order of upgrades is very dependant on what you what your truck  to do. i still have all the stock skid plates other than the rad skid that came with my hefty bumper, i dont do too much rock crawling, mostly desert running so for me skids are less of an issue.

for me it was tires, sliders, suspension, front bumper with a winch, then more suspension(TS swap for more speed to race raptors in the desert :D)

that said, if you dented a skid plate, i would only replace it with an aftermarket one.
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Skid plate question
« Reply #9 on: April 03, 2014, 04:33:25 PM »
I don't agree.  Most of the polls i've seen regarding the order of upgrades has been like this:
-tires
-suspension
-communications
everything else based on budget...motor last.
Ultimately it comes down to personal preference and wallet.

Um...weren't we referring to skid plates in this thread?
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

Toro

  • Hero Member
  • *****
  • Posts: 2066
  • 4wd Pts: 126
  • yep, Dos XX and Chipotle
Re: Re: Re: Skid plate question
« Reply #10 on: April 03, 2014, 08:27:07 PM »
Um...weren't we referring to skid plates in this thread?
...John, please stay on topic....

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: Skid plate question
« Reply #11 on: April 07, 2014, 10:00:50 AM »
OK PEOPLE, CALM DOWN!  We don't want to scare away the newbies... Unfortunately, the topic of what to get seems to be a very debated one.  We could go on and on.  Just remember that it all comes down to what you need.
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Skid plate question
« Reply #12 on: April 07, 2014, 11:44:36 AM »
All of the above is great advice...IF you are on a budget, you can also scan thenewx.org For Sale forum for used Off Road/Pro-4X stock skid plates.

However, if you plan to do any serious off roading (and if you bent a stock skid plate already...you're there), this is something to upgrade ASAP.

Gents, correct me if I'm wrong here, but order of upgrade/install would be:

-engine
-transmission
-transfer case (besides your rear diff, the lowest contact point for rocks)
-radiator
-gas tank
-rear diff

A lot of people will install the gas tank skid last - but consider this - the stock replacement cost, just for the part, for an Xterra plastic gas tank is in the neighborhood of $1,200...while the skid plate will set you back about $200.

A full set of skids from the two manufacturers listed by Toro should set you back (with hardware, meaning nuts and bolts to mount all) between $750 and $1,000...still less than the replacement of your gas tank...the last thing you should protect.

Just a few more thoughts to clog your mod friendly brain... ;D

To Drew117...I was referring to the order of upgrade/install for your skid plates in this post.  Sorry for the confusion.
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: Skid plate question
« Reply #13 on: April 07, 2014, 12:29:05 PM »
 Actually, John is correct on that skid plate order.
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

LupinOne

  • Sr. Member
  • ****
  • Location: Running Springs, CA
  • Posts: 272
  • 4wd Pts: 13
Re: Skid plate question
« Reply #14 on: April 08, 2014, 09:09:44 AM »
If you really want an OEM skid...tin...plate... :P  I have the set from my 2010.  They should fit no problem.  You are welcome to them as they are just taking room in my garage. Just shoot me a PM.
John "LupinOne"
KF6BRF

"Too close for missiles, switching to 4 low..."

 


Powered by EzPortal