Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: WTB: HID'S  (Read 4147 times)

08_x

  • Jr. Member
  • **
  • Location: los angeles, ca
  • Posts: 50
  • 4wd Pts: 3
WTB: HID'S
« on: September 28, 2014, 08:39:45 PM »
Hello guys i was just wondering if any of you guys know were to buy good HID

08_x

  • Jr. Member
  • **
  • Location: los angeles, ca
  • Posts: 50
  • 4wd Pts: 3
Re: WTB: HID'S
« Reply #1 on: September 28, 2014, 08:42:31 PM »
with good light output i recently purchased some from downtown la area and so far disappointing. One the high beams didn't work and second one of the bulbs was burnt so i want to know if any of you guys know were to get a good pair of hids with good light output

ultrapc40

  • Hero Member
  • *****
  • Location: Irvine, CA
  • Posts: 959
  • 4wd Pts: 47
  • Name is Phil
    • 2002 Nissan Frontier
Re: WTB: HID'S
« Reply #2 on: September 29, 2014, 12:47:34 AM »
DDMtuning is where I get all my HIDs have not had a problem and I have about 5 sets from 2-4 years

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re: WTB: HID'S
« Reply #3 on: September 29, 2014, 05:10:20 AM »
http://www.thenewx.org/forum/showthread.php?t=53746

His handle on thenewx is heus33 and his website is www.hidprojectors.com

I have been running his HID's for a couple years now and think I product is very good.

Terry

Greasy side down - K6XTL

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: WTB: HID'S
« Reply #4 on: September 29, 2014, 09:58:05 AM »
I second the recommendation for DDM tuning. I had a total of 4 lights (2 kits - 35 watt 5000K H3 bulbs) that I was running in some cheapy Walmart "Platinum Burner" housings on a xoskel bumper mouth bracket before I installed the winch in their place. They were bright, clean, reliable and CHEAP. They held up great, although I only used them offroad so I didn't put a whole bunch of burn time on them (although I did bounce the heck out of them). They came with some nice waterproof plugs and slim ballasts that produced very little heat (I even had two ballasts mounted on top of one another). Overall a decent quality product for the price.

I paid $30 per kit at the DDM shop in Kearny Mesa. For that price, you can buy an extra kit to use for spare bulbs or ballasts if you have any issues.

http://i231.photobucket.com/albums/ee234/jfanaselle/10-2.jpg
WTB: HID'S


http://i231.photobucket.com/albums/ee234/jfanaselle/08-2.jpg
WTB: HID'S


http://i231.photobucket.com/albums/ee234/jfanaselle/Xterra/Bracketresize1.jpg
WTB: HID'S


http://i231.photobucket.com/albums/ee234/jfanaselle/Xterra/Bracketresize2.jpg
WTB: HID'S


« Last Edit: September 29, 2014, 03:21:00 PM by JFanaselle »

SuperSlideStyle

  • Hero Member
  • *****
  • Location: Fontana, CA (Inland Empire)
  • Posts: 1788
  • 4wd Pts: 19994
  • Are we ready? Not really but here we go!
    • 2013 Nissan Xterra PRO-4X
Re: WTB: HID'S
« Reply #5 on: October 17, 2014, 04:44:24 PM »
I use specifically the Xentec brand kits from ebay.com
2013 Xterra Pro4X 6 spd
2022 Acura MDX SH-AWD

LupinOne

  • Sr. Member
  • ****
  • Location: Running Springs, CA
  • Posts: 272
  • 4wd Pts: 13
Re: WTB: HID'S
« Reply #6 on: December 01, 2014, 11:03:44 AM »
I used THIS thread from TNX to do my mods as shown in my build thread HERE.

Been pretty happy with them.
John "LupinOne"
KF6BRF

"Too close for missiles, switching to 4 low..."

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2519
  • 4wd Pts: 227
    • 2016 Pro4x
Re: WTB: HID'S
« Reply #7 on: December 01, 2014, 01:19:58 PM »
depends on the application, if you are looking for HID for your headlights, follow SoCalXTerry's recommendation and do a retrofit.  It is easier than it sounds and the output is a million times better than just throwing some HID conversion bulbs into your stock halogen housings and blinding everyone with glare(dont listen to people who tell you to just aim your lights down to reduce glare, that doesnt reduce the glare, it only limits how far you can see).  I purchased my retrofit at  theretrofitsource.com and with a discount code on thenewx, you can get 20% off iirc, which makes the retrofit very reasonable.

if you are looking for offroad lights, follow LupinOne's links and use the HID conversion bulbs in the stock housings, due to the limited space a retrofit is very difficult with the stock off road lights, and since the offroad lights are used offroad, the glare is a non issue.  i run conversion bulbs in my offroad lights and am happy with the output.  
« Last Edit: December 01, 2014, 01:22:16 PM by knightrider »
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

 


Powered by EzPortal