Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: Fallbrook to Hell's Kitchen - Sunday, 7/3/16  (Read 32440 times)

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #75 on: June 30, 2016, 12:11:57 PM »
Please add Lemans(Fire Ninja) to the list +2!

Done

Celt

  • Hero Member
  • *****
  • Location: In the basket of Deplorables. FJB Edition.
  • Posts: 3535
  • 4wd Pts: -20000
  • What this World Needs Is A Few More Rednecks.
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #76 on: June 30, 2016, 04:31:56 PM »
Please add Lemans(Fire Ninja) to the list +2!

  Well well well, there is going to be an actual elusive Fire Ninja appearance. I'm going to bring a camera and document this.
Isaiah 6:8

JCX

  • Jr. Member
  • **
  • Location: Long Beach
  • Posts: 41
  • 4wd Pts: 1
    • 2012 Super Black S
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #77 on: June 30, 2016, 06:42:22 PM »
Added. Please PM me your phone number, in case you have a last minute change or plans or something. See you there! 8)

PM sent.

Kjswa

  • Full Member
  • ***
  • Location: Huntington Beach
  • Posts: 102
  • 4wd Pts: 10
    • 2006 Xterra Off Road manual
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #78 on: July 01, 2016, 07:29:06 PM »
I'm now in 100% not trying to turn this into a mod day but I ran into an issue with my skid plates today that I'd like a second opinion on. Glad to finally make a trail run!!

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2519
  • 4wd Pts: 227
    • 2016 Pro4x
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #79 on: July 01, 2016, 07:35:04 PM »
If 2 sets of eyes are better than 1, 15 should getter done :D
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #80 on: July 01, 2016, 08:14:32 PM »
I'm now in 100% not trying to turn this into a mod day but I ran into an issue with my skid plates today that I'd like a second opinion on. Glad to finally make a trail run!!

"In" list has been updated. That leaves the only "tentative" as Steve C. (in Ben Stein's voice:) Steve?.... Steve?... Steve?...

Celt

  • Hero Member
  • *****
  • Location: In the basket of Deplorables. FJB Edition.
  • Posts: 3535
  • 4wd Pts: -20000
  • What this World Needs Is A Few More Rednecks.
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #81 on: July 01, 2016, 10:56:49 PM »
I'm now in 100% not trying to turn this into a mod day but I ran into an issue with my skid plates today that I'd like a second opinion on. Glad to finally make a trail run!!

I can bring my impact wrench.........................
Isaiah 6:8

Celt

  • Hero Member
  • *****
  • Location: In the basket of Deplorables. FJB Edition.
  • Posts: 3535
  • 4wd Pts: -20000
  • What this World Needs Is A Few More Rednecks.
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #82 on: July 01, 2016, 10:59:30 PM »
 O0
"In" list has been updated. That leaves the only "tentative" as Steve C. (in Ben Stein's voice:) Steve?.... Steve?... Steve?...

 JF, looks like my family will be bringing two separate vehicles of nefarious make and model so the conga line increases. I told Fathead about the run but I doubt he will make it. His grocery getter gets just sits in his garage and her tires get in a wad if dirt is in the path like a barn soured horse.


                                O0
             
« Last Edit: July 01, 2016, 11:14:27 PM by Celt »
Isaiah 6:8

Kjswa

  • Full Member
  • ***
  • Location: Huntington Beach
  • Posts: 102
  • 4wd Pts: 10
    • 2006 Xterra Off Road manual
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #83 on: July 02, 2016, 09:17:26 AM »
I can bring my impact wrench.........................

That could be helpful, and a drill bit. Snapped the head of a bolt off, said bolt is still in the frame....

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #84 on: July 02, 2016, 10:57:32 AM »
If you are sure that you can get this done and be trail ready before 9, thats great.  While there is always plenty of time on the trail for "the giving of adviced" with our knowledgable crew.  It's not fair to the other 15 trucks in the group to be waiting on a chore that could be done at another time.  (Unless it's an alternator swap at the top of Big Bear moutain (Inside joke).) 
I'm excited to see everybody on the trail in two days!!!
Of all the things I've lost...
I miss my mind the most

KJ6YPO

ghenderson21

  • Full Member
  • ***
  • Location: Pacific North West
  • Posts: 133
  • 4wd Pts: 6
    • 2012 Super Black S
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #85 on: July 02, 2016, 11:00:10 AM »
If you are sure that you can get this done and be trail ready before 9, thats great.  While there is always plenty of time on the trail for "the giving of adviced" with our knowledgable crew.  It's not fair to the other 15 trucks in the group to be waiting on a chore that could be done at another time.  (Unless it's an alternator swap at the top of Big Bear moutain (Inside joke).) 
I'm excited to see everybody on the trail in two days!!!
[/color]

Timeline is a little off sir! It's tomorrow! CB installed, although SWR is tough for me to peg. Sliders on except the self tapping bolts, have to complete that another day.

Looking forward to seeing everyone tomorrow!

Geoff

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #86 on: July 02, 2016, 11:44:00 AM »
Holy crap, I can't count to two!?!  See ya tomorrow :o
Of all the things I've lost...
I miss my mind the most

KJ6YPO

Kjswa

  • Full Member
  • ***
  • Location: Huntington Beach
  • Posts: 102
  • 4wd Pts: 10
    • 2006 Xterra Off Road manual
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #87 on: July 02, 2016, 11:54:50 AM »
If you are sure that you can get this done and be trail ready before 9, thats great.  While there is always plenty of time on the trail for "the giving of adviced" with our knowledgable crew.  It's not fair to the other 15 trucks in the group to be waiting on a chore that could be done at another time.  (Unless it's an alternator swap at the top of Big Bear moutain (Inside joke).) 
I'm excited to see everybody on the trail in two days!!!

It doesn't need to be fixed before hitting the trail. Just looking for a second opinion and some guidance. Will be ready to roll off at 9!

pyrofox79

  • Jr. Member
  • **
  • Posts: 51
  • 4wd Pts: 4
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #88 on: July 02, 2016, 03:27:40 PM »
Is it too late to sign up for this? I forgot to do it during the week and just remembered. It will be me My mutt and maybe another.

Ghost65

  • Old-Schooler
  • Hero Member
  • *****
  • Location: East of You
  • Posts: 862
  • 4wd Pts: -476
    • 2019 Ready Mix Taco
Re: Fallbrook to Hell's Kitchen - Sunday, 7/3/16
« Reply #89 on: July 02, 2016, 03:35:46 PM »
If you are sure that you can get this done and be trail ready before 9, thats great.  While there is always plenty of time on the trail for "the giving of adviced" with our knowledgable crew.  It's not fair to the other 15 trucks in the group to be waiting on a chore that could be done at another time.  (Unless it's an alternator swap at the top of Big Bear moutain (Inside joke).) 
I'm excited to see everybody on the trail in two days!!!

Well said.


Sent from Cygnus-X1
KD6DCI

Once again, I must state for the record: We are not a club, we are enablers for your addiction.

 


Powered by EzPortal