Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: Joe's Xterra  (Read 137731 times)

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: JFanaselle's Xterra
« Reply #30 on: June 26, 2014, 11:25:54 AM »
Good to hear from ya, Frank.
And many thanks for your support and edification on the 'D' rated side walls' superiority.

That sucks, since C is too light, and I think E too stiff for the amount of weight I carry.

J and J, bite me.

Oh yeah, what was the OP?
Of all the things I've lost...
I miss my mind the most

KJ6YPO

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #31 on: June 30, 2014, 07:33:12 PM »
First post has been updated with some fresh modifications from this weekend. :D Special thanks to DannyX for selling me the sliders. I spent an entire day refinishing them.
« Last Edit: June 23, 2015, 11:50:45 AM by JFanaselle »

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: JFanaselle's Xterra
« Reply #32 on: July 08, 2014, 01:53:13 AM »
Really like your roof rack
It's better to sweat in peace than bleed in war. Death touches all men.

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #33 on: July 09, 2014, 11:00:15 AM »
Thanks 0317. I've added the crossbars over the factory roof rack tubes now and the side-facing lighting, so now it's more of a "basket" that can hold gear better with tie-down points all the way around. I will try to grab some new pics this evening and post them. It still needs some rear-facing lighting, which I'm working on obtaining.

I was thinking about creating a new posting in the general discussion section that explains how I built it, but you're the only one who's shown an interest in it so far. It's basically a copy of some of the no-weld drop-in racks that guys built on thenewx.org with a few small changes.

xxSVxx

  • Hero Member
  • *****
  • Location: Oceanside, CA
  • Posts: 1479
  • 4wd Pts: 10093
  • Something inspiring, witty and funny goes here
    • 2010 BAMF version
Re: JFanaselle's Xterra
« Reply #34 on: July 09, 2014, 11:10:56 AM »
I think it would generate interest, bud.....Danny (Toro) fabbed up my roof rack, and some guys have shown interest in how/where/etc., so a thread on how you fabbed it up would generate plenty of interest.....give it a shot!  What have you got to lose?

My .02

:)

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #35 on: July 09, 2014, 11:34:00 AM »
Alright, let me see what I can slap together. :)

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #36 on: July 09, 2014, 07:47:03 PM »

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #37 on: August 03, 2014, 10:31:45 PM »
Managed to take advantage of the wet weather in the Inland Empire today. Found an awesome spot in Hemet to get a little dirty and have some fun (along with my cousin in his F-150) between shooting news video of the storms.

 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]
 [ You are not allowed to view attachments ]

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: JFanaselle's Xterra
« Reply #38 on: August 14, 2014, 11:10:03 AM »
Added a bunch of stuff:

1) Installed a "Rugged Trail" (eBay special) PML on 8/9/14 - 1.5" lift in the rear via a new shackle and 2.5" lift in the front via a spacer. I LOVE the new ride height. I am getting very minimal coil bucket contact at full droop (so far, I've only noticed it going over speedbumps really fast) and it's really not that bad. I may just install some soft bumpstops and be happy with it. If it bugs me enough over time, I'll look into some new UCAs.

2) Installed Bilstein 5100 shocks all the way around on 8/9/14. Front are adjustable and I have them set at one notch above stock height, just to preload the OEM springs just a tiny bit in compensation for the weight from the winch up front (this added about 1/3" to the front end ride height also). After installing these, it rides like a Cadillac on the highway. :) NO COMPLAINTS at all. I've read alot of people talk about how these ride really rough, but I presume those people are trying to lift their front end using the "adjustment" on the shocks and losing all of their droop capability, resulting in a stiff ride.

3) Installed a Masterpull 75 foot long 3/8" synthetic winch line with G110 Combi hook and aluminum Hawse fairlead on 8/13/14. Picked this up brand new still in the package off of a local Jeep guy on CL for a screaming deal. This replaced the steel cable on the Badland Harbor Freight winch to reduce weight on the front end, and it's SO MUCH easier to handle. Now I just need a solution for remounting my front license plate, since the old one snapped onto the roller fairlead.

4) Installed a set of 265 75 16 Goodyear Wrangler Duratracs on 8/13/14. I opted to stick with the 265 75 size (which is actually a slight increase in size over the 265 70's the S trim level came with) because this is my daily driver. Plus, I wanted to keep my spare under the back of the X and I've been told I can't run a 285 sized spare under there with the hitch.

OP has been updated with new mods. As she sits today (actually, this was before the synthetic line was installed, so you can still see the roller fairlead):

 [ You are not allowed to view attachments ]

 [ You are not allowed to view attachments ]
« Last Edit: August 14, 2014, 11:35:41 AM by JFanaselle »

xxSVxx

  • Hero Member
  • *****
  • Location: Oceanside, CA
  • Posts: 1479
  • 4wd Pts: 10093
  • Something inspiring, witty and funny goes here
    • 2010 BAMF version
Re: JFanaselle's Xterra - updated 8/14 w/ lift, tires and more...
« Reply #39 on: August 14, 2014, 02:19:04 PM »
lookin good boss!

CAWoody

  • Hero Member
  • *****
  • Location: Evergreen, CO
  • Posts: 970
  • 4wd Pts: 72
    • 2018 Toyota Tacoma (Really miss the X)
Re:
« Reply #40 on: August 14, 2014, 02:24:29 PM »
If your looking for UCA's, I will be selling my Total Chaos UCA's as soon as PRG sends me the right spacers for my Titan swap.  Hopefully next week.
Be careful when you follow the masses..... sometimes the "M" is silent.

RBduffer

  • BOD
  • Hero Member
  • ******
  • Location: Fallbrook of course
  • Posts: 1883
  • 4wd Pts: 135
    • '07 OR Xterra
Re: JFanaselle's Xterra - updated 8/14 w/ lift, tires and more...
« Reply #41 on: August 14, 2014, 04:14:18 PM »
Once again, I must state for the record: We are not a club, we are
             Enablers for your addiction.
Of all the things I've lost...
I miss my mind the most

KJ6YPO

SoCalXTerry

  • Hero Member
  • *****
  • Location: Northern Orange County
  • Posts: 1273
  • 4wd Pts: 54
Re:
« Reply #42 on: August 14, 2014, 05:23:45 PM »
If your looking for UCA's, I will be selling my Total Chaos UCA's as soon as PRG sends me the right spacers for my Titan swap.  Hopefully next week.

Tim was that what it was?   The spacers?
Terry

Greasy side down - K6XTL

steve c

  • Hero Member
  • *****
  • Location: Placentia
  • Posts: 1303
  • 4wd Pts: -1577
    • 2012 Pro4Steve
Re: JFanaselle's Xterra - updated 8/14 w/ lift, tires and more...
« Reply #43 on: August 14, 2014, 05:46:53 PM »
Once again, I must state for the record: We are not a club, we are
             Enablers for your addiction.

A loosely associated band of merry men and women who coincidently share an enthusiasm for Nissan Xterras.  Not a club. 
Steve - KK6OFL

ERMAHGERD CLICK ME  <--- (Build Thread Linky)

CAWoody

  • Hero Member
  • *****
  • Location: Evergreen, CO
  • Posts: 970
  • 4wd Pts: 72
    • 2018 Toyota Tacoma (Really miss the X)
Re: JFanaselle's Xterra - updated 8/14 w/ lift, tires and more...
« Reply #44 on: August 14, 2014, 06:31:10 PM »
Tim was that what it was?   The spacers?


We'll see.  Greg called today an said he is sending a new pair of UCA's that he stretched to fit.  Hopefully I will see them next week so I can install on the weekend. :-\
Be careful when you follow the masses..... sometimes the "M" is silent.

 


Powered by EzPortal