Welcome Guest!!

Welcome to SCCX, for full access to the forums, please register and join our community, it's free.

Author Topic: 0317's SAS'D X  (Read 54563 times)

Jayrat

  • Hero Member
  • *****
  • Location: SAN DIEGO / WPG
  • Posts: 1616
  • 4wd Pts: -668
  • FLBLFY
    • 2013 X
Re: 0317's SAS'D X
« Reply #90 on: February 04, 2018, 09:18:07 PM »
You can pick your nose & you can pick your friends,   But you can't wipe your friends under the couch

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #91 on: February 12, 2018, 07:44:51 PM »
1 side done

C547_A2_CF_E338_4842_AC40_FF2851_A4_F89_E" border="0
It's better to sweat in peace than bleed in war. Death touches all men.

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: 0317's SAS'D X
« Reply #92 on: February 13, 2018, 05:33:54 PM »
Did you go with Raptor Liner after all, or something else?

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #93 on: February 13, 2018, 06:38:56 PM »
Just Khaki and black rattle can. But I did use a clear coat this time. Paint was flat and clear was matte but Rig still looks shinny. I kept it Khaki for you tho
It's better to sweat in peace than bleed in war. Death touches all men.

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #94 on: February 14, 2018, 07:16:53 PM »
Locking D ring pin! Now they won’t fall off or get stolen.

DDCE86_D2_EFFA_405_C_B118_72_F789_EFFFD8" border="0
B82_C874_B_663_A_414_B_B6_F7_F70_CD1_C5_D851" border="0
F1_B50_B4_F_5691_45_A7_A150_C3_CC93857425" border="0
8_B173_E62_3007_47_A9_B3_CA_B516_BE868178" border="0
It's better to sweat in peace than bleed in war. Death touches all men.

Jayrat

  • Hero Member
  • *****
  • Location: SAN DIEGO / WPG
  • Posts: 1616
  • 4wd Pts: -668
  • FLBLFY
    • 2013 X
Re: 0317's SAS'D X
« Reply #95 on: February 14, 2018, 09:23:22 PM »
Locking D rings , what a concept
I think I need to spend more $$$
You can pick your nose & you can pick your friends,   But you can't wipe your friends under the couch

Riz98

  • Full Member
  • ***
  • Location: Lemoore
  • Posts: 143
  • 4wd Pts: 8
  • PBR ASAP
    • 2002 Nissan Xterra
Re: 0317's SAS'D X
« Reply #96 on: February 15, 2018, 06:19:43 PM »
A7591_F9_A_9_A99_4_D37_868_C_31765_AA552_CA" border="0
Did you get these arms built by someone or did you make them.  I am looking to change out the Calmini arms before this happens to me also. 

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #97 on: February 15, 2018, 07:07:11 PM »
Custom built by someone, pm me for details.
It's better to sweat in peace than bleed in war. Death touches all men.

SteeevO

  • Sr. Member
  • ****
  • Location: Fontana, CA
  • Posts: 367
  • 4wd Pts: 23
Re: 0317's SAS'D X
« Reply #98 on: February 19, 2018, 02:58:16 PM »
Nice, Michael has been cranking out a lot of stuff locally lately.

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #99 on: February 20, 2018, 07:20:49 PM »
Poison Spyder Louver added:

63_E448_FE_7793_441_B_9_E15_F8_A0_AFDF883_A" border="0
4_C27_E7_AD_419_A_4836_8478_91_C67_FC96_C3_E" border="0

Designed for a jeep so a couple inches from the top were cut off as well as room made for the wind shield sprayers.

39_F00_F91_8_C4_F_40_D8_A81_D_02_F4935_B4_C6_C" border="0
73976248_B45_F_441_E_B3_C6_7_B55_A621844_F" border="0

Modify the template to fit the new louver. Tape the louver on the hood where you want it. Use an auto center punch to mark the centers of where you will cut holes. Then cut the holes with a hole saw. Trace around the holes to mark where to cut out hood sections for the louver vents.

AD63_FC3_A_5_F80_4650_B86_E_E6932_F45074_D" border="0
5_C189694_F038_4_CE9_AA4_B_9_A813710_A130" border="0
C560_E50_C_936_A_4167_848_C_904_F950_F601_D" border="0
<a target='_blank' href='https://imgbb.com/'>free upload without registration[/url]



Cut out the sections with an angle grinder and then add some primer to prevent rust.

424_F62_D4_4_BB3_4_BE6_A451_9_FB253_CA928_F" border="0
7172_C960_8_D1_A_4_DC2_BB69_E1649_D64_BF83" border="0
4_AB50_C44_FBC2_46_AD_91_FE_2_C9813_B6_FFEF" border="0
F16_AE104_7715_4403_B388_F3102_A23_D6_B8" border="0
<a target='_blank' href='https://imgbb.com/'>how to upload image on website[/url]



Paint your hood and louver if needed.

80_D1_A971_874_E_4743_AEDE_4468524_A4_B80" border="0
E5_C3_D0_AA_9_D1_B_44_AE_81_A6_734588_CDBD02" border="0
D9857192_4_A59_4_C2_E_BED3_9_E4_E963_F5_DA2" border="0
08_E95257_E047_4538_BB50_9_DC617_C100_CC" border="0
6538_A99_C_566_F_425_A_9_F5_E_4224_A33_F336_F" border="0
C1_BC1_B98_A8_AA_4_CEB_A267_69215_A905722" border="0
089_D1_B2_A_C54_A_444_A_AF69_545_F009_C78_FC" border="0





« Last Edit: February 20, 2018, 07:22:21 PM by 0317 »
It's better to sweat in peace than bleed in war. Death touches all men.

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #100 on: February 20, 2018, 07:26:56 PM »
New paint job (spray paint) finished:

32_E10_DB7_CEE9_4_E97_AAEC_45_BDE7_D7_F24_E" border="0
35_DAE7_BB_43_EE_4793_9688_ED115536028_F" border="0
F4_BABE9_C_076_A_4_DAF_BB9_B_5_F1_C3_AABD89_A" border="0
<a target='_blank' href='https://imgbb.com/'>create image url[/url]
It's better to sweat in peace than bleed in war. Death touches all men.

CAWoody

  • Hero Member
  • *****
  • Location: Evergreen, CO
  • Posts: 970
  • 4wd Pts: 72
    • 2018 Toyota Tacoma (Really miss the X)
Re: 0317's SAS'D X
« Reply #101 on: February 21, 2018, 07:22:56 AM »
Very nice.  A little warning. I put my hood louver on about 5 years ago, couldn't be happier.  I used the spray on textured paint and within a year it started pealing.  Found out the louver is aluminum and does hold paint well.  Now it has several chunks missing.  I've been meaning to take it off and have it powder coated (recommended by Poison Spider), but I'm just too lazy to go through the effort.
Be careful when you follow the masses..... sometimes the "M" is silent.

JFanaselle

  • BOD
  • Hero Member
  • ******
  • Location: Murrieta, CA
  • Posts: 2351
  • 4wd Pts: 12000
    • 2010 Xterra S 4x4
Re: 0317's SAS'D X
« Reply #102 on: February 21, 2018, 09:17:11 AM »
Awesome work James! Looks great.

0317

  • Hero Member
  • *****
  • Location: Hemet, CA
  • Posts: 509
  • 4wd Pts: 44
  • Education through Pain
    • 04 SAS XTERRA
Re: 0317's SAS'D X
« Reply #103 on: March 03, 2018, 09:56:11 PM »
Big Bear
1_B890_AD5_EE18_4927_8_B63_32_B84_C34229_A" border="0

RTT finally put up for test fit.
5_DC192_BF_5_DC2_476_E_A3_A9_D5_D914_AC75_E3" border="0
2_A572987_6_B65_4_F0_B_9_E3_E_E470799_ACB65" border="0
0_D1_B7_F50_83_AC_47_B6_972_C_22_DC739_CFD38" border="0
It's better to sweat in peace than bleed in war. Death touches all men.

knightrider

  • Administrator
  • Hero Member
  • *****
  • Location: San Diego, CA
  • Posts: 2519
  • 4wd Pts: 227
    • 2016 Pro4x
Re: 0317's SAS'D X
« Reply #104 on: March 04, 2018, 12:05:52 AM »
Looking good.  I really need to do some snow wheeling, they always close all the trails in San Diego when it snows.
Jordan - K6XTE
2012 Knight Armor Xterra Pro-4X - Sold :(
2016 GunMetal Frontier Pro-4X with AT Summit

 


Powered by EzPortal